Too Cold in Both Sections - Top Freezer Refrigerator
Is the ice maker turned on?
Verify that the ice maker is turned on. If the water supply is not connected to the water supply line, turn the ice maker off.
If the ice maker remains on and not connected to water supply, the following could potentially happen:
- The ice maker will continue to try to make ice, causing a buzzing sound.
- The refrigerator section may be too cold.
- The freezer section may be too cold.
- The food in the crisper drawers may freeze.
CLICK HERE for more information on how to turn the ice maker on
Do the controls need to be adjusted?
You may need to adjust the freezer controls to a warmer setting to accommodate the surrounding conditions and appliance usage. A freezer that is set too low can cause the refrigerator section to be too cold as well, as air flows between both compartments.
After adjusting the controls, recheck the area in 24 hours. Controls are preset at the factory for normal household usage. If the refrigerator is being used accordingly, ensure that control is still set at the recommended factory settings; 37 degrees Fahrenheit for the refrigerator and 0 degrees Fahrenheit for the freezer. Refer to the Owner's Manual for settings.
Are the air vents blocked?
To ensure proper temperature, you need to allow room for proper airflow between the freezer and refrigerator compartments. Cool air enters and exits the refrigerator compartment from the freezer compartment through vents. Depending on your model, these vents are in different locations. If the freezer vent is blocked, cold air will be trapped in the freezer, and the freezer might be too cold.
- Locate the vents in both the freezer and refrigerator compartments and ensure that nothing is blocking the airflow.
- If vents are blocked, airflow will decrease. Temperature and moisture issues may arise due to blocked vents.
CLICK HERE for additional information on airflow
Is the refrigerator level?
It is important to ensure the refrigerator is level. A properly leveled refrigerator will help with the overall proper operation of the refrigerator. Check to make sure the floor under the refrigerator is level. If the floor is not level shims may need to be used to properly level the refrigerator. Please refer to your Owner's Manual or Installation Instructions for specific leveling information for your refrigerator.