Skip to main content
Live Chat

Thank you for your inquiry. Our chat service hours are Monday - Friday from 8 a.m. - 8 p.m. EST. Saturday from 8 a.m. - 4:30 p.m. EST.

If you are trying within the service hours and are still seeing this message, please try again after some time.

Product Help | Maytag

Lid Not Aligned - Convertible Chest Freezer

Possible Solutions

Why is it important to level and align the Lid properly?

A freezer that is not leveled correctly and/or does not have the lid properly aligned may cause the following:

  • Lid unable to close or seal properly
  • Frost build-up
  • Temperature fluctuation 
  • Lid switch is unable to make contact correctly

Is the freezer level?

It is important to ensure the freezer is level before aligning the lid. A properly leveled freezer will help with overall proper operation of the freezer.  Please refer to your Owner's Manual or Installation Instructions for specific leveling information for your freezer. 

In addition to your Owner's Manual and Installation Instructions, here are some other tips for leveling the freezer: 

  • Use a level to make sure the freezer is level from side to side and front to back.
  • Check to make sure the floor under the freezer is also level. If the floor is not level shims may need to be used.

   If the Freezer is not level it could the lid or door to not seal properly.    Level the freezer from side to side and front to back so that the lid will seal properly.

 

If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.

  • Was this article helpful?