Cleaning with Less Water
The most striking difference in this washer is the low-water washplate wash system. The washer automatically adjusts the water level to the load size; no water level selector is needed. For best performance, it is recommended to load items in loose heaps evenly around the washplate. Leave the center of the washplate uncovered for best results.
As the washer dampens and moves the load, the level of the items will settle in the basket. This is normal and does not indicate that more items should be added.
IMPORTANT: Do not add more water - it is important that there is engagement of the impeller and the clothes. If there is too much water, the clothes will float and the cleaning action will be lessened due to the design of the cycles.
Automatic Load Size Sensing
Once you start the cycle, the lid will lock, and the washer will begin the sensing process to determine the correct water level for the load. Initially the basket will start to spin prior to adding water. This is part of the sensing process and is normal. This low-water wash method uses less water and energy compared to a traditional agitator-style washer.
Choosing the Right Detergent
Use only High Efficiency detergents. The package will be marked “HE” or “High Efficiency.” Low-water washing creates excessive sudsing with a regular non-HE detergent. Using regular detergent will likely result in longer cycle times and reduced rinsing performance. It may also result in component failures. HE detergents are made to produce the right amount of suds for the best performance. Follow the manufacturer’s instructions to determine the amount of detergent to use, and do not fill the detergent cap over the "max" line when adding detergent.
Low-water cleaning means concentrated cleaning. Rather than diluting detergent as done in an agitator-style washer, this washer delivers the detergent directly to the soils. This low water wash also allows the clothing to move in a more effective way to remove soils.
Were you using the Bulky Cycle (available on some models)?
Cycle time may be longer during water fill when using the Bulky Cycle, depending on the load size. The Bulky Cycle uses a series of fills while agitating. It may appear that there is not enough water to wash a bulky load, but the washer will continue to add water while its sensors monitor the load. It could take up to 10-12 minutes to completely fill.
This process also increases cleaning performance. The benefit in agitating while filling results in improved mechanical action for a wide variety of loads. The Bulky Cycle is recommended for a lot of different types of items (jackets, rugs, comforters, etc.), all of which have different optimal water levels for load motion, depending on load size. Executing agitation during fill improves the washer's ability to reach the optimal wash water level. During the Bulky Cycle, fill will occasionally pause in order for the washer to provide additional mechanical action at a variety of water levels.
Clean Washer Cycle
If you feel that the washer level is lower than when you first started using this washer, try running a Clean Washer cycle. This cycle re-calibrates the control, and resets it back to the factory-set water levels. This cycle should be run approximately 1 time per month (using the affresh® Washer cleaner).
If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.
affresh® cleaners are available at many retailers. Find one here.
Still need help? Call or schedule service.
You may need assistance from a qualified technician. Call 1-800-344-1274 or click below to schedule an appointment.