Skip to main content
Live Chat

Thank you for your inquiry. Our chat service hours are Monday - Friday from 8 a.m. - 8 p.m. EST. Saturday from 8 a.m. - 4:30 p.m. EST.

If you are trying within the service hours and are still seeing this message, please try again after some time.

Maytag Appliances

No Beeps or Display


Possible Solutions

Cancel Sabbath Mode

The oven may be in Sabbath Mode. Sabbath Mode is used to configure the oven system so that certain features and modes are disabled or defeatured.

Refer to your Use and Care Guide for specific instructions to enable or disable the Sabbath Mode.

Disable Energy Save mode (select models)

If the range is in Energy Save mode (select models), the display will be blank when not in use.

The Energy Save mode puts the range into sleep mode and reduces energy consumption.

To Deactivate the Energy Save Mode:

  1. Press and hold SETTINGS/CLOCK for 3 seconds.  "Energy saver off" will appear in the display.
  2. The clock will reappear in the display and the range can be operated as usual.

To Activate the Energy Save Mode:

  1. Press and hold SETTINGS/CLOCK for 3 seconds.  "Energy saver on" will appear in the display.   
  2. The setting will be activated after 5 minutes.

If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.

Reset power to the product:

  • Power unit down by turning off the circuit breaker(s) for one (1) minute.
  • Power unit up by turning on the circuit breaker(s).
  • Monitor the oven for one (1) minute to ensure the error code does not display again.
  • Verify oven operation.


Still need help? Call or schedule service.

You may need assistance from a qualified technician. Call 1-800-344-1274 or click below to schedule an appointment.


  • Was this article helpful?