Skip to main content
Maytag Appliances

4. LED Display and Settings

4.  LED Display and Settings

Janus Maytag Control.jpg

When you select a cycle, its settings will light up and the Estimated Cycle Time (for Sensor Cycles) or actual time remaining (for Timed Cycles) will be displayed. See “Cycle Guide” in your Use & Care Guide for available settings on each cycle. Not all settings are available with all cycles.

  • More Time/Less Time - Touch MORE TIME or LESS TIME with Timed Cycles to increase or decrease the length of a Timed Dry or Quick Dry cycle.
  • Temp  - When using any cycle except Sanitize, you may select a dry temperature based on the type of load you are drying. Use the warmest setting safe for the garments in the load. Follow garment label instructions.
  • Dryness - When using Sensor Cycles (except for the Sanitize cycle), you may select a Dryness level based on the type of load you are drying.
    • NOTE: Dryness is for use with Sensor Cycles only.
  • Was this article helpful?