Skip to main content
Live Chat

Thank you for your inquiry. Our chat service hours are Monday - Friday from 8 a.m. - 8 p.m. EST. Saturday from 8 a.m. - 4:30 p.m. EST.

If you are trying within the service hours and are still seeing this message, please try again after some time.

Product Help | Maytag

Replacing the Light Bulb - Freezer

How to Check or Replace the Light Bulb in your Maytag Freezer

Before replacing the light bulb, check to see if it is loose and tighten it if needed. If it needs to be replaced, be sure to replace it with an appliance bulb of the same size, shape, and wattage (no greater than 40 watts). Not all appliance bulbs will fit your freezer. For instructions on how to Change the Light Bulb, see your Owner's Manual.  

To Replace the Light Bulb (on some models): 

NOTE: Not all appliance bulbs will fit your freezer. Be sure to replace the bulb with one of the same size, shape, and wattage. Please review your Owner's Manual for specific instructions for your model. 

  1. Unplug the freezer or disconnect the power.
  2. Remove the light shield by squeezing the lens from the sides, pushing back, and pulling down.

Unplug freezer or disconnect power. Remove the light shield by squeezing the lens from the sides, pushing back and pulling down.

  1. Replace the bulb with a 40-watt maximum appliance bulb or an LED rated for wet/damp locations.
    NOTE: Some LED replacement light bulbs are not recommended for wet/damp environments. Refrigerator fresh food and freezer compartments are considered wet/damp environments. When replacing the factory-installed LED bulb, read and follow all instructions on the LED packaging. A replacement LED bulb can be purchased from an authorized dealer.
  2. Replace the light shield.
  3. Plug in the freezer or reconnect power.

This part can be ordered at our Purchase Genuine Parts site.

 

  • Was this article helpful?