F8 E3 Code in display:

The overflow condition occurs if there is too much water or foam in the washer.

Are you using HE or High Efficiency Detergent?

Use only HE or High Efficiency detergent. Always measure detergent. If you have very soft water, you may need to use less detergent. Using non-HE detergent or more than the manufacturer's recommended amount of detergent can cause excessive suds. The excess suds can cause the washer to run at a reduced spin speed, resulting in very wet loads, or error codes to appear. 

CLICK HERE for more information on HE Detergent and how the washer works.

Did you use "no splash" or "easy pour" liquid chlorine bleach? 

This type of liquid chlorine bleach contains a thickening agent that may create excess suds in washers. If this is the case, run the washer with regular liquid bleach products.

Is the drain hose kinked or clogged?

The Sud or Sd code may be the result of a restricted drain hose or standpipe (drainpipe).

Make sure that the drain hose is not kinked or clogged.

CLICK HERE for a video on proper drain hose installation