There May be a Problem with the Home Power Supply:
An L2 (Low or No Line Voltage) Diagnostic code indicates that there may be a problem with your home power supply, keeping the dryer's heater from turning on. The dryer will continue to run when this diagnostic code is present. Touch any pad to clear the code from the display and return to the estimated time remaining.
NOTE: This error will only show during the initial installation.
Try the Following:
- Check to see if a household fuse has blown or circuit breaker has tripped. Electric dryers use two household fuses or breakers. Replace the fuse or reset the circuit breaker.
- Confirm that the power cord is properly installed. Refer the Installation Instructions for details.
- Select a Timed Dry heated cycle and restart the dryer. If the message persists, consult a qualified electrician.