Skip to main content
Live Chat

Thank you for your inquiry. Our chat service hours are Monday - Friday from 8 a.m. - 8 p.m. EST. Saturday from 8 a.m. - 4:30 p.m. EST.

If you are trying within the service hours and are still seeing this message, please try again after some time.

Product Help | Maytag

Changing the Factory Dryness Level on a Dryer

How to Change the Factory Dryness Level on your Maytag Dryer

Have you tried changing your factory dryness level? Some models can be changed: You can make adjustments to your Automatic Cycles by adjusting the Factory Dryness Level:

How to change the automatic cycle settings to increase or decrease drying time:

If all your loads on Automatic Cycles are consistently less dry or drier than you would like, you may change the default settings to increase or decrease the default dryness level. Your automatic drying settings can be adjusted to adapt to different installations, environmental conditions, or personal preferences. This change is retained and will affect Automatic Cycles, not just the current cycle/load. This feature is not available on all models. Visit your Owner's Manual or Control Guide for additional information. 

There are five drying settings, which are displayed using the time display:

Setting Level Description  Amount of Change
0 Much Wetter Clothes 30% Less Drying Time
1 Slightly Wetter Clothes 15% Less Drying Time
2 Factory Preset Dryness Level Factory Preset Dryness Level 
3 Slightly Drier Clothes 15% More Drying Time
4 Much Drier Clothes 30% More Drying Time

 

To change the drying settings:

NOTE: The settings cannot be changed while the dryer is running or paused. To adjust the default settings, the dryer must be in standby mode (power is off).

Dryer control panel to change the drying settings

  1. Before starting a cycle, touch and hold DRYNESS for 6 seconds.
  2. Touch DRYNESS to select the dryness level shown in the time display: 0, 1, 2, 3, or 4.
  3. Touch START/PAUSE to save the new dryness level setting.

 

 

  • Was this article helpful?