Skip to main content
Maytag Appliances

E1

Possible Solutions

E1 - water inlet alarm

An E1 Error code means the correct water level has not been reached within 20 minutes of the washer starting. Check the following:

  • Check that the water faucets are not closed.
  • Check that the water pressure in the house is over 20 kPa.
  • Clean the inlet hose filter screens. Be careful not to remove or disturb the screen placement. 
  • Check that the drain hose is not below 27½" (700 mm) from the floor

 

Still need help? Call or schedule service.

You may need assistance from a qualified technician. Call 1-800-344-1274 or click below to schedule an appointment.

 

  • Was this article helpful?