Is the drain hose properly aligned over the drain?
Ensure the drain hose is aligned properly over the drain. If it's not properly aligned, it could cause leaking and draining issues. Move the ice maker to align the drain. See “Connecting to Water Supply" in the Use & Care Guide, for specific information for your model.
Is the correct type of drain being used?
- Gravity Drain Systems
Gravity drain systems are used when a near by floor drain is available and must not have low points where water can settle. The floor drains must be large enough to accommodate drainage from all drains.
- Drain Pump Systems
A drain pump is designed to pump water to a maximum height of 10 ft (3 m) and is necessary when a floor drain is not available. Use only Whirlpool approved drain pump kit part number 1901A. Some models come with the drain pump already equipped, if your ice maker didn't come with a drain pump, and it is needed, it can be purchased as an accessory.
This accessory is available for purchase. Locate the accessories page in the menu above.
Verify the correct drain hose has been installed on the Ice Maker. A 10 ft. corrugated drain hose, must be used when installing the optional drain pump accessory kit. If the correct drain hose is not used it could cause the ice maker to not drain properly, which may cause the ice maker to turn off.
If you would like to purchase one of these accessories, you may visit your local retailer or Order Accessories online.
Still need help? Call or schedule service.
You may need assistance from a qualified technician. Call 1-800-344-1274 or click below to schedule an appointment.