Skip to main content
Maytag Appliances

How to Remove the Door Rails

How to Remove the Door Rails

Snap-On Door Rails (on some models)

To remove and replace the rails: 

  1. Depending on your model, remove the rails by pushing in slightly on the front of the bracket while pulling out on the inside tab. Repeat these steps for the other end.
  2. Replace the rails by aligning the ends of the brackets with the buttons on the sides of the door liner. Firmly snap bracket and assembly onto the tabs above the shelf as shown.

Drop-In Door Rails (on some models)

To remove and replace the rails:

  1. Remove the rails by pulling straight up on each end of the rail.
  2. Replace the rails by sliding the shelf rail into the slots on the door and pushing the rail straight down until it stops.

  • Was this article helpful?